• Color Head Straight Pins – Singer 00254
• Bobbin – Singer 21350
• Snap Fastener Kit – Singer 00839
• Matching Sewing Thread – Singer Fusion Collection
• 8-1/2” Sewing Scissors – Singer Shear Perfection 03408
• Iron
• (3) 20”x20” napkins, (can all be the same color, or coordinates as shown
• Café Curtain Rod, ½” diameter

Instructions (for sample as shown)

1. Fold each of the 2 solid colored napkins on the diagonal, not quite in half so that the corners do not meet but are approx. 4” apart. Press folds firmly.
2. Lay napkins side to side, (folded edges should be at the top,) and slip one napkin into the other. Pin together all across top.
3. Machine stitch across top ¼” in from fold and then 1 ½” in from fold. This is the casing for the curtain rod. (Note: If you are using a larger diameter rod, the casing should be made wider. Remove pins.
4. Cut print napkin in half across the diagonal. Fold cut end over ½”, press and then pin hem in place. Machine stitch ¼” in from fold.
5. Fold hemmed edge over 7/8” from hem and press.
   
6. Lay this napkin half over the center top of the stitched together solid napkins. Pin in place
7. Use snap fastener kit to attach napkins together at top center and sides of print napkin. Additional fasteners can be used as embellishments at napkin points.